Stewart Filmscreen Luxus Grande S6, Руководство пользователя

Страница: 5 / 16

Luxus Grande 5
You will need:
`
Enough ladders for the personnel supporting the screen during the mounting process
`
A level
`
Fasteners appropriate for the surface on which the screen is being mounted
`
2 block and tackles or scissor lifts to raise the unit into place
`
Standard screwdriver
`
7/16” (1 1 cm) hex head screwdriver
Note:
This manual refers to “AC” to represent electrical power Your location may use 120 V, 230 V, or
other electrical power Screen systems are manufactured using the electrical power type specified for
the location Use appropriate power sources for your location
Factory Advisory
The factory advises against installing a concealed or recessed electrical projection screen
permanently You must be able to access and remove the unit should future service be necessary
Suggested solutions for removing the unit include:
`
A removable ceiling cover plate under the mounting location
`
Access to the unit through an attic or overhead space
UNPACKING
`
DO NOT remove the paper hanging from the trapdoor at this time You should remove it only after
the unit is hung, all electrical connections have been made, and the screen is in operation
`
Remove the bottom flat braket on the bottom of the case
WARNING!
Failure to remove the batten lock-down screws can result in permanent damage to the screen
PREPARING THE INSTALLATION (CONTINUED)