Stewart Filmscreen Luxus Grande S6, Руководство пользователя

Страница: 13 / 16

Luxus Grande 13
Problem Cause Action Steps
Screen won’t operate No AC power available
Outboard switching problem
Check to see if the circuit
breaker has switched off Reset
if needed Check outboard
switching apparatus Check
voltage availability Contact an
electrician
Screen won’t roll up or down
(even though power is
available)
Bad connection at switch Have an electrician or
qualified service person
check the low voltage control
switch-line connections
Screen roller chatters when
power is activated
Can be caused by voltage
drop, bad connections, or a
defective switch
Have an electrician or
qualified service person
check all hook-ups including
all outboard wiring
Unit hums in up mode (Screen
has already retracted )
The screen batten is retracting
too far into the case Failure to
correct can damage motor
and screen. Do not use the unit
until this problem is resolved.
Have a qualified service
person adjust the blue UP
extension thumbwheel See
pp 9-10 of this manual
Screen drops when up
direction is activated (grinding
noise occurs)
Drop in voltage Screen motor requires full
voltage Have an electrician
or qualified service person
check available voltage
Screen continues past bottom
stop position
Red extension thumbwheel is
out of adjustment
Readjust the red DOWN
extension thumbwheel See
pp 9-10 of this manual
Batten retracts too far into
case
Blue extension thumbwheel is
out of adjustment
Failure to
correct can damage motor
and screen. Do not use the unit
until this problem is resolved.
Have a qualified service
person readjust the blue UP
extension thumbwheel
Dirt, finger prints, marks, etc
on screen surface
Improper handling of screen Brush off or use a mild
detergent solution with clean
rag or cotton swab
Indentations appear on screen
surface
Debris or particles adhering to
screen due to static cling
Check back of screen; gently
brush debris away by hand
TROUBLESHOOTING