Adjusting the limit switch
You can use the limit switch to control the amount of tilt. Figure 41 shows
the location of the limit switch.
There are two limit switches you can use to adjust the tilt of the frame.
The yellow limit switch sets the stop position when the frame is
moved up to the wall.
The white limit switch sets the stop position when the frame is
tilted down, away from the wall.
To change the stop position when the frame is tilted:
1. Tilt the screen to its current stop position.
2. Locate the white down limit switch. Use a screwdriver to turn the
switch in a counterclockwise direction to increase the degree of
tilt, and clockwise to decrease the degree of tilt.
To change the stop position when the frame is up against the wall:
1. Position the screen to its current stop position.
2. Locate the yellow up limit switch. Use a screwdriver to turn the
switch in a counterclockwise direction to move the screen closer
to the wall, and clockwise to make the frame stop farther from the
wall.
Once you have made the adjustment, whenever you operate the tilt
mechanism, it will automatically stop at the new position.
Luxus ScreenWall Series: Owner’s Manual
23
Figure 41:
Limit switch access; detail (inset)
Limit switches