manualshive.com logo in svg

Stewart Filmscreen Corp Luxus ScreenWall Series, Руководство пользователя, Страница: 14 / 32

Поделиться
Скачать
Stewart Filmscreen Corp Luxus ScreenWall Series Скачать руководство пользователя страница 14

Attaching the screen to the frame

12

Stewart Filmscreen Corporation

6. Position the frame

against the wall to
measure placement of
wall mount screws.
Keep in mind that the
brackets slide
horizontally so you
can position them
precisely.  Refer to
Figure 15.

7. Drill holes as needed

and install the wall
mount hardware.  You
can use the supplied
#12 x 1 1/2” Phillips
pan head screws or
other appropriate
fasteners. (For
example, wood
screws, carriage bolts,
and hex head
screws.)  The keyhole
opening is 5/8" with a
1/4" slot.

8.  Temporarily hang the

frame on the wall
mount hardware to
ensure that the frame
is level  and properly
aligned with the
mounting hardware.
Remove the frame
from the wall, tighten
hardware, then back
off 1/8 turn.

Figure 15:

Aligning frame and brackets on wall; detail of bracket (inset)

Figure 16:

Assembled frame with screen attached

1. Attach the screen to

the frame.  Refer to
the section starting on
page 24.  Work very
carefully around the
brackets.

2. Figure 16 shows the

completed assembly.
Place the frame on
the pre-mounted wall
screws.

, 

ed

 

Содержание Luxus ScreenWall Series

































Отзывы:

Нет отзывов