AV25-2 User Manual Rev A
Page 6
Table of Contents
Top
5.3.2
Universal Mount Installation
The AV25-2 also has a universal mount bracket available
which allows the unit to be mounted against a wall or
under a table. Two screws are included in the kit, which
will affix the bracket to the top or side of the unit. Two
holes in the bracket are available for mounting the unit
where desired.
5.3.3
Cooling and Ventilation
The AV25-2 is a convection-cooled amplifier. Ensure that
there is sufficient open space around the amplifier to
allow for free air flow. Do not stack amplifiers on top of
each other or mount amplifier in a way that air flow
around the unit will be impaired. Inadequate airflow
around the amplifier may cause the amplifier to overheat
and potentially become damaged as a result
5.3.4
Operating Voltage
The AV25-2 is shipped with an in-line power supply. This is a universal power supply that operates on
AC mains from 100-240V at 50 or 60 Hz. The 48VDC output from this supply is connected to the rear
of the amplifier.
Use only the power supply shipped with the amplifier.
Part Number: AV-Bracket
