Step 12 (Cont.): Wiring up the Station
You must remove the mini connection wire assembly off of the ‘Solo’ inside the box to wire the solar
panel
Remove the mini clip (left) from the
Solo power adapter inside the
communication box. Squeeze hard
with your fingers on each end and
firmly pull back with a slight side to
side wiggle to remove the clip
Wire the black wire from the solar
panel to ‘GND’ connection and the
red wire to the ‘Solar’ connection
using a small precision flat
screwdriver to looser the screws,
insert the wire and tighten the screws
Replace the Solo mini connection clip
and make sure it is full seated
14
