Stevens AeroModel Sky Scout Floats, Инструкция по эксплуатации

Страница: 9 / 13

Float Construction Cont.
☐ Fit forward deck F10 to frame assembly,
spanning F6, former F2 and forward mounting
plate F8. Square assembly on a flat surface
and tack at mating surface of formers, sides,
and decking with medium CA.
☐ At front of float, sand F6 and F10 to match
profile of the front of the inner fame sides F1.
☐ At rear of float, sand F7 to match profile of the
rear of the inner frame sides F1.
☐ Locate float sides F11 to right and left side of
float assembly using tabs in formers to align
part. Bond from inside by wicking thin CA
glue between inner frame and float sides .
☐ Fit and bond F12a to F12b to create part F12.
☐ Fit middle decking F12 to float assembly,
spanning F8, F9 and former F4. Bond with
thick or medium CA.
Sky Scout Floats © 2010 Stevens AeroModel all rights reserved. Page 9 of 13
F10
F6
F3
F8
F11 (Left)
F12a
F12b
F12
F8
F9
F4
F10
F6
F7
F1
F1
F1
F1
F11 (Right)