Project Checklist
Kit Contents
☐
Laser cut wood (7 Sheets - See inventory on following pages)
☐
Photo Illustrated instruction Manual
☐
Covering and Wire Strut Templates (2 pages 11x17)
☐
3 - Pre-bent Wire Struts
☐
2 - 1/64 in. Plywood Float Bottoms Part “F16”
☐
Small Hardware Bag (3 x 3 in.)
8 - Steel Landing Gear Straps [DUB158]
16 - #2 x 1/4 in. Screws
2 - 1/8 in. Balsa Parts “F6”
Sky Scout Floats © 2010 Stevens AeroModel all rights reserved.
Page 3 of 13
Required Building Supplies and Tools
☐
1/2 oz. Medium CA Glue
☐
1/2 oz. Thin CA Glue
☐
CA glue accelerator (kicker)
☐
Balsa filler
☐
Hobby Knife with ample supply of #11 blades
☐
Sanding block with 400 and 600 grit paper
☐
Heat Gun and Covering Iron
☐
1 Roll AeroFILM Covering Material
Suggested Building Supplies
☐
1/2 oz. Thick CA Glue
☐
CA glue de-bonder
☐
CA glue accelerator
☐
Low Tack Painters Masking Tape
☐
Soldering Iron with fine tip
