© 2007 Stevens AeroModel.
Page 6 of 33
General Assembly Instructions
Thank you, for purchasing this
Stevens Aeromodel
SHAFT – “Super Hi-Performance Aerobatic Flight Trainer”. This kit
provides the builder and pilot a refreshing change of pace from heavy “ARF” style plywood box airframe construction, and
blends stick and tissue design methods of the past with state of the art CAD technology and precision interlocking laser
cut parts. The result is something you will find truly exceptional to build and fly. Please keep in mind that this kit is
intended for a novice-intermediate builder and novice-intermediate pilot as a second aileron plane. If you do not meet
these criteria it is recommended to seek help from a more experienced builder / pilot.
Best Regards,
Bill Stevens
[email protected]
Stevens AeroModel
“Built to Fly”
P.O. Box 15347
Colorado Springs, CO 80935
Assembly Tips
READ THE INSTRUCTIONS
and the plan sheet prior to starting any work!
Tape plans to work table. Protect plans from glue spills using the poly tubing your kit was bagged in.
Join all parts with Thin CA unless otherwise specified.
DO NOT REMOVE THE PARTS FROM THE BALSA SHEETS UNTIL REQUIRED!
DO NOT FORCE THE FIT.
When in doubt, double check your parts. Removal of material should not be
required. If you feel that you have a poor connection, check first to see that the part is not upside down.
Reference each piece against the plan sheet.
Making solid glue joints: Hold parts together on top of plan sheet using moderate pressure to fit parts. Wick
Thin CA into joint. There is no need to pin parts to work table as all pieces interlock and self - jig.
Содержание SHAFT S400
Страница 4: ...2007 Stevens AeroModel Page 4 of 33 Laser Cut Parts Inventory...
Страница 5: ...2007 Stevens AeroModel Page 5 of 33 Laser Cut Parts Inventory...
Страница 25: ...2007 Stevens AeroModel Page 25 of 33 THIS PAGE HAS BEEN PROVIDED TO SCHEME A COLOR SCHEME...
Страница 26: ...2007 Stevens AeroModel Page 26 of 33...
