© 2007 Stevens AeroModel.
Page 3 of 33
REQUIRED TO COMPLETE KIT:
Kit Contents
:
Rolled computer drawn Plan Sheets
Illustrated Instruction Manual
Laser Cut Parts Inventory (on next page)
2 - 24” length carbon fiber bar stock
2 - .045” x 18” length music wire
1 - 1/32” x 11.5” length music wire
2 - 3/16” square x 24” length balsa leading edge
1 - Pre formed wire landing gear (3/32” diameter wire)
Large Hardware Bag
•
6 – Gum Rubber Bands #16
•
4 – DuBro RC Micro II Control Horns (DUB919)
•
4 – DuBro RC Micro II EZ-Link (DUB920)
•
4 – DuBro RC Micro E/Z Connector (DUB845)
•
2 – Rubber Wheel Retainers
•
2 – 4-40 Blind Nut
•
2 – 4-40 x 3/8” Nylon Bolt
•
2 – 3/16” Neo. Magnet
•
2 – 1/8” x 3-1/2” Hardwood Dowel
•
1 – Pair Du-Bro RC 1-3/4 in. Super Lite Wheels [DUB175SL]
•
1 – 3/16” x 3-1/2” Hardwood Dowel
•
1 – Laser Cut Basswood Elevator Joiner
Recommended Finishing Items
:
1.
1 Roll of AeroFILM Lite (Solarfilm Solite, or Nelson Lite Film may be substituted).
Suggested Electronics:
1.
4 - Sub Micro Servos (Hitec HS-55)
2.
1 - 6” Y-Servo Extension
3.
2 - 6” Servo Extension
4.
1 - Micro Receiver (10-12g)
Power System:
1.
Hacker A20-20L Direct Drive
2.
9x4.7 - 10x4.7 APC SF
3.
11.1v 910-1350mAh LiPo (Rated for at least 17A Continuous).
Items You May Need:
1.
Thin CA (super glue)
2.
Medium CA (super glue)
3. Razor
Blade(s)
4.
Fine Grit Sand Paper and Sanding Block
5. Clear
Tape
6.
Balsa Wood Filler
Содержание SHAFT S400
Страница 4: ...2007 Stevens AeroModel Page 4 of 33 Laser Cut Parts Inventory...
Страница 5: ...2007 Stevens AeroModel Page 5 of 33 Laser Cut Parts Inventory...
Страница 25: ...2007 Stevens AeroModel Page 25 of 33 THIS PAGE HAS BEEN PROVIDED TO SCHEME A COLOR SCHEME...
Страница 26: ...2007 Stevens AeroModel Page 26 of 33...
