
9
Diagnost Guide
In the eventuality of any problems, the amplifier will power down and the
RED LED (PROT)
light will begin to blink.
Depending on the problem, the
RED LED (PROT)
light will flash a certain number of times. The following table summarizes
the diagnostics:
Output short circuit
or overload.
Overheating.
Low battery.
Battery overload or volta-
ge greater than allowed.
Check to make sure the speaker cables are
pro-perly isolated.
Verify minimum impedance.
Make sure the equipment is installed in a
well ventilated location.
When used for long periods, the battery will
run down. Recharge the battery.
Have the battery and/or alternator checked
by a professional.
Number of Flashes
Problem
Solution
1
2
OVER
BAT
4
3
LOW
BAT
NOTE:
In the event that the
RED LED (PROT)
light is flashing continuously, unplug the speakers and turn the
equipment back on. If the problem persists, contact
STETSOM
tech support.
Technical Specifications
Channels:
Power @ 14.4V - 1 Ohm (RMS):
Power @ 14.4V - 2 Ohms (RMS):
Power @ 14.4V - 4 Ohms (RMS):
Min. Output Impedance:
Input Impedance:
Input Sensitivity:
T.H.D:
Signal to Noise Ratio:
Frequency Resp. @ 8 Ohms (-3dB)
:
Crossover Low Pass:
Crossover High Pass:
EQ - BASS @ 45Hz:
EQ - MID BASS @ 270 Hz:
EQ - MID HIGH @ 2KHz:
Over Clip (Power):
Power Supply:
Consumption Music:
Consumption BASS:
Dimensions (H x W x L):
Weight:
Any updates made in this manual will be available for consumers to consult without any charge on the brand’s site.
It is recommended that the updated manual be consulted whenever necessary.
The measured data are based on equipment from the STETSOM laboratory. Frequency reference of 1Khz with THD+N to ≤10%
in impedances referring to the indicated in each measurement. The electronic components and the manufacturing process can
present manufacturing variations, thus leading to a variation in the measurements made.
EU Declaration of Conformity (DoC):
EX10500EQ - 1 OHM:
www.stetsom.com.br/certifications/EX10500EQ_1--EUDoC2014-30-EU.pdf
EX10500EQ - 2 OHMS:
www.stetsom.com.br/certifications/EX10500EQ_2--EUDoC2014-30-EU.pdf
EX10500EQ 1 OHM
1
10500W
7000W
4800W
1 OHM
25K OHMS
0.2V
≤ 10% THD
>90dB
10Hz ~ 15KHz
50Hz ~ 15KHz
10Hz ~ 700Hz
±10dB
±10dB
±10dB
+15%
9.5 ~ 15Vdc
6.7 ~ 495A
6.7 ~ 990A
77 x 294 x 510 mm
7.5 Kg
EX10500EQ 2 OHMS
1
—
11000W
7000W
2 Ohms
26K Ohms
0.2V
≤ 10% THD
>90dB
10Hz ~ 15KHz
50Hz ~ 15KHz
10Hz ~ 700Hz
±10dB
±10dB
±10dB
+15%
9.5 ~ 15Vdc
6.7 ~ 495A
6.7 ~ 990A
77 x 294 x 510 mm
7.5 Kg