24
25
This example of installati on is valid for
GOL G6 / G7
models,
for more informati on and schemati cs of other brands
and models, access the link:
www.stetsom.com.br/en/
instaladores
or from
QR code
:
INSTALLATION FOR THE MODELS
ALARM SPECIFICATIONS
CENTRAL LOCATED ABOVE THE FUSE BOX
24
25
GOL / VOYAGE / SAVEIRO (G6 - G7)
PIN 36
(brown/
red)
(brown/red)
Ground
180Ω 1/4W
RESISTOR
+12V
THE RELAY IS ONLY NECESSARY FOR THE
MODELS MADE IN 2015 OR BEFORE.
red/black
green/black
It is essenti al that you use a multi meter to test electrical current.
STETSOM
is not
responsible in any way for damages caused to the electric system of the vehicle, since
there are constant changes in the original electric system of the vehicle including
locati on and color of wires.
* It is necessary to remove the 73-way
connector from the module and separate
it in order to see the numbering of the
pins in the connector as shown in the
image.
180Ω
Brown
Gray
Brown
Golden
Red
Black
Brown
Golden
220Ω
Use
220 Ohms
resistor if you have
trouble fi nding
180 Ohms
.
Alarm Module
Operati ng Voltage
Consumpti on
Lock
Output Signal
(Sound, Auxiliary, Lock e Etc)
Remote Control
Ba� ery
Frequency of Operati on
9 ~ 16 V
10 mA ~ 18 mA
Up to 10A
200 mA
CR2032
(3V)
433,92 MHz
All parts of this product, including electrical and electronic components, must be recycled or
reused and should not be disposed of as household waste. Look for recycle points for these
materials and do your part to protect the environment.
Any updates made to this manual will be available for consumers to consult without any charge on the
brand’s site. It is recommended that the updated manual be consulted whenever necessary.
Note:
All parts of this product, including electrical and electronic components, must be recycled or reused and
should not be disposed of as household waste. Look for recycle points for these materials and do your part to
protect the environment.
Images contained in this manual are merely illustrati ve and may diff er from the actual product.
