3
1. RCA JACK INPUT:
Input of the signal to be amplified. Connect to the radio/
player using high quality shielded RCA cables to prevent unwanted noise.
2. LEVEL:
Level control for the signal at the amplifier’s input.
3. CROSSOVER:
▪
HIGH PASS FILTER (H.P.F.):
This variable control allows you to select the
initial frequency from
10Hz ~ 90Hz
that will be reproduced by the amplifier.
▪
LOW PASS FILTER (L.P.F.):
This variable control allows you to select the
final frequency from
90Hz ~ 15KHz
that will be reproduced by the amplifier.
4. BASS BOOST:
▪
BASS:
Variable control for bass boost from
0dB ~ +10dB
.
▪
FREQ:
Variable control for
BASS
boost frequency from
30Hz ~ 70Hz
.
5. FLAT KEY:
This switch allows you to turn the
FLAT
mode on or off. Settings
made on the
CROSSOVER and BOOST
controls will be turned off when
using this mode.
6. COOLER:
It cools the amplifier. Install in a cool place being careful to not
obstruct the air vents.
Input, output and audio controls
4
3
2
5
1
6.
COOLER
