STERWINS 1200 BC-2, Инструкции по безопасности

Страница: 280 / 292

Clean the product as described above.
Carry out the cleaning and maintenance works before storage.
Store the product and its accessories in a dark, dry, frost-free, well-
ventilated place.
Always store the product in a place that is inaccessible to children..
WARNING! Do not place the product on its cutting means to avoid
damages!
Attach the protection guard to the cutter blade before storage and
transport.
To keep the machine always in good working condition you should take
care the rules
1. Store the cutter, instruction manual and accessories in a secure, dry
place. In this way you will always have the information ready to hand.
2. Remove dust and dirt regularly.
3. Re-lubricate all moving parts at regular intervals.
4. Never use caustic agents to clean plastic parts.
Never disassemble the tool or carry out any repairs. Always have the
cutter maintained or repaired by a competent person at an authorized
service center.
1. Keep the product clean and free from debris after each use and before
storage.
2. Inspect the product before each use for worn or damaged parts. Do not
operate the product if any parts are broken or show signs of wear.
MAINTENANCE
Warning!
When the product is stopped for maintenance,
inspection or storage, always shut off the power switch,
disconnect the power supply from the main and make sure all moving
parts have come to a stop. Danger of moving hazardous parts!
2. SAFETY INSTRUCTIONS
280
EN