stertil-KONI ST1075-FBF Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 102

background image

Operating instructions (Version 0)

18

ST 1075

• Always lower the mobile column lifts into the

safety lock before starting any work on the vehicle
or leaving the vehicle unattended.

FOR YOUR AND OTHER PEOPLES SAFETY: SAVE
THESE INSTRUCTIONS.

Warning

w

All accessories supplied with this lift are to be used on this lift only.
Accessories from other lifts are not acceptable and could result in injury to the
user.

2.4

Manufacturers instructions to the lift
owner/employer

The owner/employer shall:

• Ensure that lift operators are qualified and that they are trained in the safe

use and operation of the lift using the manufacturers operating
instructions; ALI/SM 01-1, ALI Lifting it Right safety manual; ALI/ST-90, ALI
Safety Tips card; ANSI/ALI ALOIM-2008, American National Standard for
Automotive Lifts-Safety Requirements for Operation Inspection and
Maintenance; ALI/WL Series, ALI Uniform Warning Label Decals/Placards;
SAE J2184, Vehicle Lift Points for Service Garage Lifting.

• Establish procedures to periodically inspect the lift in accordance with the

lift manufacturers instructions; ANSI/ALI ALOIM-2008, American National
Standard for Automotive Lifts-Safety Requirements for Inspection and
Maintenance; and the employer shall ensure that lift inspectors are
qualified and that they are adequately trained in the inspection of the lift.

• Maintain the periodic inspection and maintenance records recommended

by the manufacturer or ANSI/ALI ALOIM-2008, American National Standard
for Automotive Lifts-Safety Requirements for Inspection and Maintenance;
and the employer shall ensure that lift inspectors are qualified and that they
are adequately trained in the inspection of the lift.

• Display the lift manufacturers operating instructions; ALI/SM 01-1, ALI

Lifting it Right safety manual; ALI/ST-90, ALI Safety Tips card; ANSI/ALI
ALOIM-2008, American National Standard for Automotive Lifts-Safety
Requirements for Operation Inspection and Maintenance; in a conspicuous
location in the lift area convenient to the operator.

«
...
16
17
18
19
20
...
»

Содержание ST1075-FBF







































































































Отзывы:

Нет отзывов

Похожие инструкции для ST1075-FBF

Бренд: Lampert Страницы: 18

Бренд: Accu-Sort Страницы: 22

Бренд: SMT Страницы: 24

Бренд: Linak Страницы: 33

Бренд: Genie Страницы: 202

Бренд: Woodward Страницы: 112

Бренд: GANTERUD Страницы: 24

Бренд: Telwin Страницы: 108

Бренд: Valx Страницы: 28

Бренд: Lincoln Electric Страницы: 102

Бренд: Dhollandia Страницы: 69

SC Express Series

Бренд: National Instruments Страницы: 36

Бренд: Dyna-Glo Страницы: 9

Бренд: WinSystems Страницы: 30

Бренд: Blue Giant Страницы: 24

Бренд: IGBT Страницы: 16

Бренд: STAMOS Страницы: 27

Бренд: Everlast Страницы: 33

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды