4
PRE-INSTALLATION INFO
Check contents
Separate all parts from the packaging and check each part with the
pack contents section. Pay attention to the variations of the different
models.
Make sure all parts are accounted for before discarding any packaging
material.
If any parts are missing, do not attempt to install your electronic faucet
until you obtain the missing parts.
Preparation for installation
Flush the water supply lines thoroughly before installing the faucet. Do
not allow dirt, Teflon tape or metal particles to enter the faucet. Shut
off water supply.
Important
All plumbing is to be installed in accordance with applicable codes and
regulations.
Warning
To avoid reflection problems
keep a distance of more than
300 mm. between the bottom of
the washbasin and the spout.
