Stern TMS210A, Руководство по эксплуатации

Страница: 8 / 35

8 | ENGLISH
WARNING
Read this manual carefully before using the machine, for your own safety.
SAFETY INSTRUCTIONS
When using the machine, always observe the enclosed safety instructions as well as the additional
safety instructions.
The following symbols are used throughout this manual:
Denotes risk of personal injury or damage to the tool.
You will find the following symbols on the machine:
Take measures to protect your eyes.
Take measures to protect hearing.
Consult the manual.
ADDITIONAL SAFETY INSTRUCTIONS FOR TABLE SAWS
Never remove the guard. Make sure that the saw blade is correctly screened by the guard.
Never remove the riving knife. The distance between the toothed rim and the riving knife should not
exceed 5 mm.
Do not use saw blades made of HSS steel.
Do not use saw blades which are bent, deformed or otherwise damaged.
Do not use saw blades which do not comply with the specifications stated in this manual.
Do not use an adaptor to mount a saw blade with a larger bore.
Before sawing, remove all nails and other metal objects from the workpiece.
Never switch the machine on while the workpiece touches the saw blade.
Never start sawing before the machine reaches full speed.
Use a push stick when sawing extremely small workpieces.
Never attempt to saw round workpieces.
Do not leave the work area until the machine has been switched off and the saw blade has come to
a complete standstill.
Never attempt to stop the saw blade by exerting side pressure.
ADDITIONAL SAFETY INSTRUCTIONS FOR MITRE SAWS
Make sure that all devices screening the saw blade are in perfect working order.
Make sure that the saw blade is screened correctly.
Never block the saw blade guard. Repair a jammed saw blade guard before using the machine
again.
Do not use saw blades made of HSS steel.
Do not use bent, deformed or otherwise damaged saw blades.
Do not use saw blades which do not meet the specifications stated in this manual.
Before sawing, remove all nails and other metal objects from the workpiece.
Never start sawing before the saw reaches its full speed.
Securely clamp the workpiece. Never attempt to saw extremely small workpieces.
Only leave the machine after switching off and when the saw blade has come to a complete
standstill. Pull down the saw head and press in the locking knob.
Never try to slow the saw blade down by exerting pressure on the side.