7
R A N G E A D J U S T M E N T
The sensor range is the greatest distance that an object can be away from the
sensor to activate the faucet. The sensor is factory preset. If necessary, it may
be adjusted as follows:
Adjusting the sensor settings with a remote control – optional and
recommended:
The sensor range is the greatest distance that an object can be away from the
sensor to activate the faucet. The sensor is factory preset. If necessary, it may
be adjusted as follows
In order to adjust the sensor with a Remote Control you should hold the Remote
Control straight in front of the sensor in a distance of about 4”(10cm). Choose
the function you want to adjust by pressing once on one of the function buttons.
After pressing once on a specific function button, a quick flashing of the red light
in front of the sensor will occur. At this stage, you can change the adjustment
by pressing the (-) or (+) buttons, every push will increase or decrease one
level. After finishing the adjustment, turn on
the water supply.
Range:
Press + to increase detection range
and – to decrease the detection range of the
sensor.
The remote control can also be used to
adjust:
Flow time (Security time):
Press + to increase
the security time and – to decrease it.
Delay In:
Changes the time the water will start
flowing when the user’s hands are within the sensor range. Press + to increase
it and – to decrease it.
Delay Out:
Changes the time of water flow after the user’s hands are removed.
Press + to increase it and – to decrease it.
On/Off:
Press this function button and the faucet will remain off for 1 minute. To
cancel this function press the on/off again.
Reset:
This function allows to come back to all the factory settings. Press the
Reset button and without releasing it, press one time the + button.
