4
PRE-INSTALLATION INFO
CHECK CONTENTS
Separate all parts from packaging and check each part with the pack contents section.
Make sure all parts are accounted for before discarding any packaging material. If any
parts are missing, do not attempt to install the electronic flush valve until you obtain
the missing parts.
WARNINGS
Do not install the system facing a mirror or any other electronic system operated by an
infrared sensor.
To prevent reflection problems, it is recommended keep a minimum distance of
1.50 meters between the flush valve and other objects.
PREPARATION FOR INSTALLATION
Flush water supply lines thoroughly before installing the flush valve. Do not allow dirt,
Teflon tape or metal particles to enter the flush valve.
All plumbing is to be installed in accordance with applicable codes and regulations.
