11
SETTINGS ADJUSTMENT
WITH REMOTE CONTROL
ADJUSTING THE SETTINGS WITH THE REMOTE CONTROL
If necessary, the sensor settings can be adjusted as following:
Shut off the water supply. In order to adjust the sensor with the remote control,
hold the remote control straight in front of the sensor in a distance of about 6-8”
(15-20cm). Choose the function you want to adjust by pressing once on one of the
function buttons. After pressing once on a specific function button, a quick flashing
of the red light at the front of the sensor will occur. At this stage, you can change the
setting by pressing the (+) or the (-) buttons, every push will increase or decrease one
level. After finishing the adjustment, turn the water supply back on.
DETECTION RANGE
DELAY IN TIME
SECURITY TIME
LOCK OUT TIME
DELAY OUT TIME
TEMPORARY OFF
FUNCTION
RESET
DETECTION RANGE: If necessary, use the remote control to adjust
the sensor range as follows:
Press the RANGE button. Wait until a quick flashing of the red light
of the sensor eye is perceived. Then, press + to increase one level
and – to reduce it every push will increase or decrease one level.
