4
STEP 1 – REMOVE ALL MOUNTING HARDWARE
Drill a hole (23-24 mm) at the designated
installation location of the foam soap
dispenser body.
Drill a small hole (2-3 mm) above the previous
one for the anti-rotation pin. Consult the
diagram.
Remove the hexagonal nut and the disk from
the base of the soap dispenser spout.
RECOMMENDED HOLE SIZE
16mm
23-24mm
STEP 2 – INSTALLING THE SOAP DISPENSER
1
Insert the Soap dispenser base and
the anti-rotation pin into the drilled
holes.
Fix the base behind the wall with the
hexagonal nut and the disk.
SOAP DISPENSER BASE
DISK
ANTI-ROTATION PIN
HEXAGONAL NUT
2
Fix the bottle support to the desired
location. The pump MUST be within
reach range of the Com cable and
black supply tube.
INSTALLATION
