STEP 1 --
Press
NEXT
and simultaneously for 3 seconds.
STEP 2 --
Hardness:
N/A (not available) for "filter" selection.
Press
NEXT
to go to step 3. Press
REGEN
if you need to return to the previous step.
STEP 3 --
Days Between Regeneration:
Set the number of days between regenerations.
This allowable range is 1 to 99.
This example shows a regeneration every four days. The manufacturer's factory
setting is every 3 days or 1,000 gallons, whichever comes first.
Press
NEXT
to set regeneration time.
STEP 4 --
Regeneration Hour:
The manufacturer has factory set 12:00 a.m. as the default.
This is the hour of day for regeneration and can be reset by using or buttons.
"AM/PM" toggles after 12. The default time is 12:00 a.m. (recommended for a
normal household).
Press
NEXT
to go to step 5. Press
REGEN
if you need to return to the previous step.
STEP 5 --
Regeneration Minutes:
Set the minutes using or buttons. Press
NEXT
to exit
Installer Settings. Press
REGEN
if you need to return to the previous step. To initiate
a manual regeneration immediately, press and hold the
REGEN
button for three
seconds. The system will begin to regenerate immediately. The control may be
manually stepped through the regeneration cycles by press
REGEN.
2. Programming:
1
2
3
4
5
RETURN TO
NORMAL MODE
9
