Document #
Revision Date
82070-275, Revision A
2 of 22
1/16/2009
Notice for Users
IMPORTANT:
To aid in reporting in case of loss or theft, please
record the monitor’s model and serial numbers in
the space provided. The numbers are located on
the rear of the monitor.
FCC Statement
WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment
not expressly approved by the manufacturer could void the user’s authority to operate this equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the interference at
his own expense.
Declaration of Conformity
VividImage
®
Monochrome Monitor-
MON-STE21MC-2MP / MON-STE21MC-3MP / MON-STE20MC-5MP:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
CE:
EN 55022, EN61000-3-2, EN 61000-3-3, EN 55024, IEC 61000-4, EN 60950 (low voltage directive)
Function, Intended Application and Mode of Operation:
The VividImage
®
Series of monitors are intended to be used in the displaying and viewing of video and
graphics for review and analysis by trained medical practitioners. The mode of operation for this device
is continuous operation.
For a complete list of current certifications, please refer to the Specifications page of this manual.
Model No:
Serial No:
IMPORTANT:
To aid in reporting in the case of loss or theft, or for
service maintenance purposes, please record the
monitor’s model and serial numbers in the space
provided. The numbers are located on the back of
the monitor.
