Document #82070-646, Revision C
CONFIDENTIAL
©2010 VTS Medical Systems, LLC
Page 14 of 40
DICOM
If the system is to be used in conjunction with a DICOM server, it must be setup in advance. This section
applies only to systems configured to work with a DICOM server.
DICOM Worklist mode is disabled by default. To enable, both the DICOM Worklist Server and the
DICOM Storage Server on the Setup page must be connected.
See
Figure 8
1.
To begin, click on the
Setup
tab.
2.
Check the box to Enable DICOM.
3.
To add a
DICOM Worklist
server, click on the tab, fill in the fields and click
Update
.
4.
To add a
DICOM Storage Server
server, click on the tab, fill in the fields and click
Update
.
5.
Change compression mode and SOP class with the
Parameters
tab.
When these settings are filled in correctly, and the Enable DICOM checkbox is selected, the system
will be connected to a DICOM server.
When the connection is working the light on the Worklist page will turn green.
When DICOM is active, you can Start a DICOM Case, Search the DICOM Worklist server, and
append any previously recorded DICOM cases.
To disable DICOM, uncheck the box labeled
Enable DICOM
. Disabling will not lose your connection
settings.
Figure 8: Setup Page / DICOM Worklist
3
2
1
4 5