Steris Basil 3500 Скачать руководство пользователя страница 55

Страница: 55 / 87

5-12

122998-741

Operator Manual

Cycle and Control Value Programming

Date is input as two-digit numerical values for Month/Day/Year.
Time is input as Hour/Minute/Second.

NOTE: When changing date and time, note the following:

1) Pressing CURSOR arrows or VALUE arrows repeatedly in one

direction will cycle through all available positions or letters and
numbers.

2) If Access Code feature is enabled and selected cycle is not

locked out, Access Code sequence will appear after Date and
Time screen.

Press

SAVE VALUES

touch pad to save miscellaneous values,

exit Change Values mode, and return screen to cycle menu.

NOTE: At this point, pressing CHANGE VALUES touch pad will
also save all changed operating values, exit Change Values
mode, and return screen to cycle menu.

5.5 Programming

Values with Access

Code Enabled

When desired cycle name is flashing, press

CHANGE VALUES

touch pad to access Change Values mode. Printer records:

* CHANGE VALUE3:51:17P
*********************************

and, if selected cycle is locked out, following screen appears:

DO YOU KNOW ACCESS
CODE? NO

__Indicates flashing position.

Press

VALUE arrows

(either up or down) to toggle between YES

and NO answer. If NO is selected, screen returns to cycle menu
once

CHANGE VALUES

touch pad is pressed.

Press

CHANGE VALUES

touch pad. If YES was selected, fol-

lowing screen appears:

ENTER ACCESS CODE.

CODE=0000

__Indicates flashing position.

To enter access code, press

CURSOR arrows

(right or left) to

advance flashing position one space at a time. Press

VALUE

arrows

(up or down) to select desired number (0-9). If an

incorrect access code is entered, screen returns to cycle menu
once

CHANGE VALUES

touch pad is pressed.

NOTE: Pressing CURSOR arrows or VALUE arrows repeatedly
in one direction will cycle through all available positions or letters
and numbers.

Содержание Basil 3500
























































































Результаты поиска

Содержание Basil 3500

Отзывы:

Похожие инструкции для Basil 3500

Бренды по названию

Популярные бренды

Steris Basil 3500, Руководство оператора

Результаты поиска

Содержание Basil 3500

Отзывы:

Похожие инструкции для Basil 3500

Бренды по названию

Популярные бренды