5-11
Cycle and Control Value Programming
Operator Manual
122998-741
5.4 Programming
Operating Values
1.
Set
POWER-OFF/STANDBY
Switch, located behind printer
door, to
POWER
. Unit name temporarily appears on screen then
display shows first cycle menu:
CYCLE 1
CYCLE 2
CYCLE 3
CYCLE 4
__Indicates flashing position.
2.
Press
CHANGE VALUES
touch pad to access Change Values
mode.
NOTE: Access to operating values may be made through any
cycle.
First Change Values screen appears:
CHANGE CYCLE NAME
CYCLE 1
__Indicates flashing position.
NOTE: Change Values mode may be exited at any time by
pressing SAVE VALUES touch pad. Control will save changed
values and return screen to selected cycle menu.
3.
Press
CHANGE VALUES
touch pad several times to advance
through phase values screens until Change Operating Values
option screen appears:
CHANGE MISCELLANEOUS
VALUES?
NO
__Indicates flashing position.
Press
VALUE arrow
(either up or down) to toggle between YES
and NO answer. Select YES to continue in Change Values mode.
NOTE: If NO is selected, pressing CHANGE VALUES or SAVE
VALUES returns display screen to cycle menu.
4.
Press
CHANGE VALUES
touch pad. Printer enabling screen
appears:
PRINTER ENABLED?
NO
__Indicates flashing position.
Press
VALUE arrow
(either up or down) to toggle between YES
and NO answer. Select YES to enable printer, NO to disable it.
5.
Press
CHANGE VALUES
touch pad. Date and Time screen
appears:
DATE MM/DD/YY
TIME HH:MM:SSA
__Indicates flashing position.
To enter correct date and time, press
CURSOR arrows
(right or
left) to advance flashing position one space at a time. Press
VALUE arrows
(up or down) to select desired number (0-9).