Steris Basil 1100, Руководство оператора

Страница: 30 / 48

5-2
122996-004 Operator Manual Routine Maintenance
Table 5-1 is to be used as a preventive maintenance record and, along with
the instructions in this section, as a guide to performing preventive mainte-
nance. Preventive maintenance is not covered under warranty.
5.2 Preventive
Maintenance
Table 5-1. Preventive Maintenance
SERVICE PERFORMED Min. Frequency
1.0 PREPARATION FOR PREVENTIVE MAINTENANCE
1.1 Discuss equipment with operators. 6 x per year
1.2 Follow appropriate safety procedures: prepare unit for Preventive Maintenance. 6 x per year
2.0 PIPING COMPONENTS
2.1 Verify each hand valve operates easily; check valve packing for leaks; 6 x per year
rebuild or replace as needed.
2.2 Rebuild fill water solenoid valve, if equipped. 1 x per year
2.3 Inspect cold water strainer for debris; clean if needed. 6 x per year
2.4 Inspect drain strainer for debris; clean if needed. 6 x per year
2.5 Check for plugged headers and jets; clean if needed 6 x per year
2.6 Verify proper alignment of spray jets. 6 x per year
3.0 MECHANICAL SYSTEMS
3.1 Inspect rollers for wear. 6 x per year
4.0 FINAL CHECKOUT AND TEST
4.1 Clean dirt and lint from components. Check all wiring, terminals, and socket 6 x per year
connections for damage or fraying.
4.2 Verify that unit has proper labels (CAUTION, WARNING). 6 x per year
4.3 Run a one-minute Fill Cycle to verify proper operation. 6 x per year
4.4 Reinstall any panel or cover removed. Check area to assure removal of all 6 x per year
materials used during inspection.
4.5 Notify customer that Preventive Maintenance inspection is complete. 6x per year