background image

1

2

3

4

5

6

7

Guide to SteriPEN

®

Adventurer

Opti

1) UV Lamp Cover
2) UV Lamp Assembly
3) Optical water sensor
4) Activation Button
5) Indicator LED (Light Emitting Diode): shows activation status
6) Battery Compartment End Cap
7) Battery Compartment End Cap Screw

SteriPEN

®

Adventurer

Opti

User’s Guide

See Water
in a Whole New Light

Содержание Adventurer Opti

Страница 1: ...ver 2 UV Lamp Assembly 3 Optical water sensor 4 Activation Button 5 Indicator LED Light Emitting Diode shows activation status 6 Battery Compartment End Cap 7 Battery Compartment End Cap Screw SteriPEN AdventurerOpti User s Guide See Water in a Whole New Light ...

Страница 2: ... the UV dose is complete NOTE If red LED turns on after lamp shuts off the dose was not complete 7 Remove AdventurerOpti from water Dry off lamp and optical water sensor with clean cloth IMPORTANT NOTE Many brands of CR123 batteries have built in protection circuitry that instantly disables battery function when batteries reach a specific low charge threshold If this disable function is triggered ...

Страница 3: ... and Cleaning When not in use AdventurerOpti should be kept in a clean dry non abrasive area or container AdventurerOpti should not be exposed to ambient temperatures above 140 F 60 C or below 4 F 20 C When storing AdventurerOpti for long periods remove batteries To clean AdventurerOpti wash with a soft cloth and a mild soap solution Rinse soap from device and dry with a clean soft cloth Note that...

Страница 4: ...r If in doubt about volume of water to be treated confirm volume with a measuring device such as a measuring cup Do not store AdventurerOpti for long periods with batteries installed Batteries may in rare instances leak or corrode and cause damage to device When operating properly the AdventurerOpti s UV lamp will emit visible light as well as UV If UV lamp is not emitting visible light it is not ...

Отзывы: