44
TEST:
Test, mapping and connection/short cable.
SCAN:
Emit tone to
fi
nd cable.
OFF:
Shut down
Switch function
Power and function button “TEST”:
Power and change function button
1
2
STATUS
SCAN
OFF
TEST
3
4
5
6
G
7
8
- Press the function button for 2 seconds, until the “VERIFY” LED stops
fl
ashing
and stays on. You can test open/shorted telecom cable.
- By connecting the alligators to the wire ends, you can test if the resistance is
high or low according to the brightness of the number ‘1’ LED, brighter means
low resistance, otherwise, the resistance is high.
- Press the change function button brie
fl
y to change the
speed from slow to fast scanning.
