Before using your new Charger powerbank, read carefully this User’s manual.
Product design and specifications are subject to change, without notice.
WARRANTY
This Steren product is warranted under normal usage against defects in workmanship
and materials to the original purchaser for one year from the date of purchase.
CONDITIONS
1.- This warranty card with all the required information, invoice or purchase ticket, product
box or package, and product, must be presented when warranty service is required.
2.- If the product stills on the warranty time, the company will repair it free of charge.
3.- The repairing time will not exceed 30 natural days, from the day the claim was
received.
4.- Steren sell parts, components, consumables and accessories to customer, as well
as warranty service, at any of the addresses mentioned later.
THIS WARRANTY IS VOID IN THE NEXT CASES:
If the product has been damaged by an accident, acts of God, mishandling, leaky batteries,
failure to follow enclosed instructions, improper repair by unauthorized personnel, improper
safe keeping, among others.
a) The consumer can also claim the warranty service in the purchase establishment.
b) If you lose the warranty card, we can reissue it, if you show the invoice or purchase
ticket.
RETAILER INFORMATION
Name of the retailer
Address
Product
Brand
Part number
Serial number
Date of delivery
Product:
Charger powerbank
Model: 903-300
Brand: Steren
In case your product fails
or have questions, please
contact your nearest dealer.
If you are in Mexico, please
give a call to our Call Center.
Call Center
01 800 500 9000
Important
Highlights
Do not use or store the equipment near wet places it. May cause malfunction or
shock hazard.
Clean only with a soft, dry cloth.
Do not drop or hit the equipment, may cause damages.
Controls
Operation
Batteries life time
Your new battery charger allows you to charge Ni-Cd batteries.
It has 5 contacts and you can recharges batteries in all capacities: 1 to 4pcs AAA, AA, C,
D and/ or 9V.
It can recharge from a single battery.
It has a switch to verify that the battery is loaded (only cylindrical batteries).
It has a voltage switch.
1
. Charge/ test switch.
2
. Test´s LED indicator.
3
. Load´s LEDs indicators.
1
. Move the voltage switch in accord to the electrical
voltage on your home or office.
Specifications
Input:
127/220V~ 50/60Hz
Output:
1.2V - - - 120mA
9V - - - 13mA
Nominal consumption:
3.6 kWh/month
Stand-by power consumption:
0.54 kWh/month
Make sure to discharge completely the batteries before to charging
Ni-Cd batteries can be recharged up to 1000 times, depending of the use, charging time
and battery.
2
. Connect the charger to electrical outlet.
3
. If you want to make a test (know if the battery has energy) place the battery in the last
compartment and move the switch to "Test". If the battery has energy the LED indicator
will light.
4
. To use the charge function, place the rechargeable batteries with the correct polarity. The
LED indicators light up according the place where the batteries are.
Battery type
Full charge
Normal charge
AAA - 1.2 Vcc
8 - 9h
5 - 6h
AA - 1.2 Vcc
9h
006 - 9 Vcc
14h
C - 1.2 Vcc
9h
9h
D - 1.2 Vcc
14h
14h
32h
1200 mAh
2100 mAh
200 mAh
1100 mAh
10h
10h
15h
9h
1200 mAh
10h
1800 mAh
700 mAh
15h
6h
1800 mAh
15h
4000 mAh
33h
Fast charge
Charging time batteries
