background image

10

4 .00  

Installation of accessories

Heating cables:

 The lifting platform is delivered as standard without heating 

cables. In the base frame space has been made for a heating cable cassette. 

For outdoor assembly, it is recommended that heating cables are always built 

into the lifting platform’s base. Alternatively, heating cables can be cast into 

a concrete base below the lift plate. The purpose of the cable is to keep the 

base free of snow and ice. Assembly must be carried out by the supplier.

Two-way voice communication:

 It is possible to establish two-way voice 

communication. If assistance is needed, press the alarm button and the auto-

matic emergency call will after 10 seconds be transferred to a preset phone 

number.

Extension cable set for external motor housing:

 The motor housing can 

as standard be placed 2,5 metres from the left tower. The extension set con-

sists of a hydraulic hose and an electric cable of 3 metres.

Perforated steel:

 Side plates of lift basket and doors are available in perfo-

rated steel instead of glass.

Remote control:

 As an option the lifting platform can be supplied with infra-

red remote control.

5 .00  

Safety measures

Operating switches .

 The UP or DOWN switches must be held in while the 

lifting platform is running. 

Emergency stop switches .

 The lifting platform is equipped with an easy-

access, self-locking emergency stop switch, which is placed between the 

operating switches.

Overload signal .

 The lifting platform has both a visual and acoustic signal 

that will be activated when the lifting platform is overloaded.

Main power switch .

 The lifting platform has a lockable main power switch. 

This is placed inside the house in the vicinity of or beside the lifting platform. 

The main power switch is used during servicing or to prevent unwanted use.

Automatic doors .

 In order to be able to operate the lifting platform, both 

doors must be in the closed position. The doors are opened and closed auto-

matically, when the operating switch is activated. 

© Guldmann GB/US-1412/01/18 • # 30901020

© Guldmann GB/US-1412/01/18 • # 30901020

Содержание LP8





















Отзывы: