Stensat StenBOT Rover Kit, Руководство пользователя

Страница: 102 / 180

102 102
Connecting the LED to a Digital Pin
●
The LED is not lit at this time
because the digital pin 3 needs to be
programmed to generate a voltage.
●
The program to the right will cause
the LED to blink.
●
Create a new program and enter the
code.
●
Upload the code to the processor
board. Make sure the processor boar
is plugged into the USB port.
●
Save the program and use a new file
name such as “blinky”.
void setup()
{
pinMode(3,OUTPUT);
}
void loop()
{
digitalWrite(3,HIGH);
delay(500);
digitalWrite(3,LOW);
delay(500);
}