STEMME S6-RT, Руководство по эксплуатации самолета, Страница: 193 / 236

7 22 Revision:
Date of Issue: 18. November 2011 Date of Rev.: . .
' . ! 11111111111111111111111111111
The seats are made of cushioned seat pans, which are integrated into the
cockpit floor. Their positions are adjustable at the top and bottom (optional), so
that they can be positioned ergonomically. The upper sections of each backrest
are designed as head rests.
Optionally, the backrest can also be adjusted at the bottom. The adjustment has
to be done before flight by moving the backrest along the lower mounting rails.
By pulling the adjusting rail left and right to the inside at the same time the
backrest is unlocked and can be moved to the desired position. Pay attention to
even move of left and right rail to avoid wedge of adjustment. After adjustment
lock the rails in the nearest position.
Also, the slope of the backrest can be adjusted. This allows the backrest to be
positioned by placing a small lever in one of several detents near the mounting
of the seat belts.
Every seat is equipped with a four point safety harness and a central lock. The
abdominal belts are mounted at mounting positions at the left and right sides of
the seat pan. The shoulder belts are mounted at the crossbar located above and
behind the seatbacks.
Permitted seat belts are documented in chapter 6.5 of this Flight Manual.
Attachment points for automatic parachutes are NOT provided. Due to this, only
use parachutes that are operated by hand.