STEMME S6-RT, Руководство по эксплуатации самолета

Страница: 159 / 236

5 Revision:
Date of Issue: 18. November 2011 Date of Rev.: . .
" # $% & ++++++++++++++++++++++
The current empty mass and empty CG location must be documented
chronologically in a report of empty mass and CG location (chapter 6.3.1).
Every change in the empty mass or empty CG location (which might be caused
by changes in equipment, repainting, repairs or similar) must be documented in
this report.
If the cause of the changes is precisely known (mass and lever must be known;
for example, when changes in equipment are made), then new empty mass and
empty CG location can be determined through calculations. If the cause of the
changes is NOT precisely known (for example, when making repairs), the
aircraft must be weighted again.
" & ! / # $% &
The following logsheet describes the chronological changes in the aircraft’s
empty mass and CG location. (The logsheet can be reused for subsequent
reports.) These changes might be caused by changes in equipment and / or
structural parts (for example: repairs). All levers refer to the reference plane
(RP). (behind RP: positive lever, in front of RP: negative lever).
The first entries are the values determined during the pre delivery inspection.