Stelrad E-VENTO 0184B0002, Руководство пользователя и инструкция по установке, Страница: 16 / 26

16
The Boost symbol and the heating indicator appear on the dis-
play and the maximum temperature flashes.
14- You can set the Boost maximum temperature by pressing
or from 25°C to 39°C by intervals of 1°C.
15- To save and move automatically to the next setting, press
. To exit the user settings, press twice.
SETTING THE TEMPERATURE UNIT
The pre-set temperature unit is degrees Celsius. This setting can-
not be changed on this version.
16- To move automatically to the next setting, press . To exit
the user settings, press twice.
RESTORING FACTORY SETTINGS
In order to restore factory settings, proceed in the following or-
der:
1- From the setting of the temperature unit, press .
rest
appears on the display.
2-
NO
appears. Press or to select
YES
.
yes
= Factory settings reset
NO
= Factory settings not reset
3- Press the key for 5 seconds. The device returns to its initial
configuration and goes back automatically to the home dis -
play of the user settings.
5 sec.
Parameters Factory settings
Operation
Comfort setting temperature 19°C
Boost duration 60 min.
Keypad lock Disabled
User settings
Backlighting L3
Eco mode temperature
lowering-level
-3,5°C
Frost protection temperature 7°C
Super Comfort Enabled
Minimum set of Comfort
setting temperature
7°C
Maximum set of Comfort
setting temperature
30°C
Maximal Boost duration 60 min.
Maximum ambient
temperature for the automatic
stop of the Boost
35°C
Temperature unit °C
The following factory values will be effective:
Press to exit the user settings.