Stelrad E-VENTO 0184B0002, Руководство пользователя и инструкция по установке, Страница: 14 / 26

14
USER SETTINGS
ACCESS
You access User settings in 3 steps:
From Auto, Comfort, Eco or Frost protection mode :
Information display
1
Information display
1
User
= user settings
Press for 5
seconds
1
Press briefly
twice
2
Press briefly
3
Setting sequence:
Backlighting Eco mode temperature lowering-level Frost protection temperature Super comfort Comfort setting
temperature limit Maximal Boost duration Maximum ambient temperature Temperature unit
BACKLIGHT SETTING
2- Press to save and move to the next setting.
SETTING THE ECO MODE TEMPERATURE
LOWERING-LEVEL
The drop in temperature is set at -3.5°C compared to the set
temperature of the Comfort mode. You can adjust the lowered
level from -1°C to -8°C, by intervals of 0.5°C.
Important: whatever the lowering level is set at, the Eco setting
temperature will never exceed 19°C.
3-
Press or to obtain the temperature level you require.
SETTING THE FROST PROTECTION
TEMPERATURE
Your device is preset at 7°C. You can adjust the Frost protection
temperature from 5°C to 15°C, by intevals of 0.5°C.
6- Press to save and move to the next setting.
To exit the user settings, press twice.
5- Press or to obtain the temperature you require.
1- Three modes can be set:
L1
= Temporary backlighting: Backlight of the display when
a button is pressed or during occupancy detection.
L2
= Non-stop backlighting: Backlight of the display all the
time.
L3
= Temporary backlighting: Backlight of the display when
a button is pressed.
L3 mode is the default setting.
Press
or to choose the setting you require.
To exit the user settings, press twice.
4- Press to save and move to the next setting.
To exit the user settings, press twice.