-
8
-
-
8
-
3
SECURE THE MAESTRO THERMOSTAT MOUNTING PLATE
Secure the MAESTRO thermostat mounting plate to the electrical box using the screws supplied.
1 -
Loosen the screw at the base of the MAESTRO thermostat, without completely removing it, until the thermostat and
the mounting plate are no longer holding together.
2 -
Slide the mounting plate downward and then pull on it to separate it from the thermostat.
3 -
Using the mounting screws supplied (2), secure the MAESTRO thermostat mounting plate to the electrical box. Ensure
the plate is perfectly straight so that the thermostat is also straight.
4 -
Pass the power supply wires through the large opening at the centre of the mounting plate.
NOTE
: You can position the mounting plate
either to the left, in the centre or to the right
of the electrical box, according to your needs.
(See image below).
