stellar labs TC23, Руководство пользователя

Страница: 11 / 42

Stellar
®
TC23 Telescopic Crane Owner’s Manual | Page 7
Installation Overview
9.8 in
(250 mm)
9.8 in
(250 mm)
3.35 in
(85 mm)
ø
ø
2.36 in
(60 mm)
0.82 in
(21 mm)
4.72 in
(120 mm)
TC23 Mounting Detail
1. Use the dimensional specifications to properly size and position the crane for mounting.
2. Use the detail on the following page to drill .82” diameter holes into the mounting plate.
3. Use a crane or lifting device capable of lifting the weight of the TC23 (See specifications
for shipping weight details).
4. Connect straps or chain from the lifting device to the main boom of the TC23.
5. Remove motor to allow installation of the mounting bolts.
6. Use four (4) 0.75-10 UNC Grade 8 bolts, washers, and nuts. (See install drawing for details)
7. Using the lifting device, lower the TC23 just above the mounting surface and start the
bolts. Have someone assist in leveling the crane.
8. Secure the crane using the mounting hardware provided. Note: longer or shorter bolts
may be required – recommended thread engagement into crane base is 0.75” – use
grade 8, zinc plated bolts only.
9. Torque the bolts to proper torque.
10. Remove supporting crane.
11. Hook up hydraulics and electrical using the schematics provided later in this chapter.