www.mcmelectronics.com
10
u
Do not install near any source of heat such as radiators, heaters, other
heat producing items.
u
Connect to a power source that provides between 90~240VAC,
50~60Hz only.
u
To maintain the warranty, use only with proper, authorized
accessories, mounting hardware and cabling.
u
Unplug the product from the AC source during lighting storms or
periods of potential power source spikes, surges or other fluctuations.
Product Quality & Compliance
u
Products from us meet all required safety standards in force at the
time of manufacturer and are fully compliant with them.
u
Inspect the packing before opening, If the packing appears to have
sustained significant damage, please take extra care before using the
product.
u
If you suspect the product has been damaged, do not use it. Return to
your supplier immediately.
u
Keep all packaging in the event the device requires transport at later
date.
Warranty
This device is warranted against defects for a period of 365 days from the
date of purchase. This warranty includes manufacture defects and failure
due to normal use and operation. Failure due to misuse, excessive wear or
damage, improper installation or other external factors is not covered
under this warranty. MCM Electronics is not responsible for any
consequential on inconsequential damage to any other unit or component
incorporated with this device. There are no other warranties, express or
implied, which extend beyond this unit, and there are no warranties of
fitness for any particular purpose. The warranty does not cover
consequential damage due to defective or improper use of products.
www.mcmelectronics.com
3
Operation
This unit may be operated in one of the following modes:
Standalone mode
: Utilizing numerous built in lighting programs and its
internal microphone for sound activation.
Slave mode
: Connected to another lamp, mirroring the operation of that
lamp in Standalone mode.
External DMX control
: Also in slave mode, with control being
accomplished by an industry standard DMX-512 controller.
Initially Powering the Unit
Upon initial power up, the unit will display its default DMX address, 001.
The letter A will preceed this, indicating it is in 3-channel DMX mode.
Note that the display will only remain lit for a period of approximately 20
seconds. This prevents the brightness of the LED display from interfering
with scenery. Pressing any button will relight the display.
Operating Modes
As mentioned above, the stand-alone mode utilizes multiple internal
programs to provide an assortment of automatic operations. While
operating in this manner, the unit is also operating as a DMX “master”, in
that any connected PAR lamps in “Slave” mode will mimic the operation
of this lamp. By placing this lamp in “Slave” mode, it allows it to be
controlled by another lamp, or DMX controller.
If this unit is going to be used in stand-alone mode, skip to the
Built-In
Program Mode
section
.
Selecting a DMX Mode
If the unit is going to be controlled by an external DMX controller, slave
from another LED LAMP, or set as a DMX master, you must first
determine whether you would like to operate the unit in 3, 4 or 16 channel
DMX mode. Naturally, 16 DMX channels offers the greatest flexibility,
