www.mcmelectronics.com
4
while three channels offers the simplest operation, four channel mode
being a compromise between the two. The best setting will depend upon
your individual situation.
To select one of these modes, press the MENU button, the display will
light A001. Press the DOWN button, one time, the display will read either
Nod1, Nod2 or Nod3 indicating the DMX mode. Pressing the ENTER
button will cause the “N” to blink, you will then be able to select one of
the following modes:
•
Nod3 – 3CH RGB
•
Nod2– 4CH RGB + Dimmer
•
Nod1 –16CH RGB + individual lamp c Program
Setting DMX Address
Once the desired mode is selected, Press The UP button and A001 will
again appear. Pressing the ENTER key will cause the “A” to blink,
allowing the DMX address to be set. Use the UP or DOWN button to
select the first DMX address of the unit. You may select any DMX address
between 001 and 512. Press ENTER to confirm. Addr will show again.
The unit is now ready to operate in SLAVE mode.
Built-In Program Mode
To set to Program Mode, press the
MENU
button to return to the root
menu. From the root menu, you can use the
UP
or
DOWN
buttons to
scroll through all built in programs, as well as select the number of DMX
channels and the DMX address. Following are a list of the built-in
programs. Within each program is the ability to select a numeric value
between 00~100. For example, if you select the first program, RL – –, you
then press ENTER, and 100 will be displayed. Using the UP and DOWN
keys, you may select any value from 00~100. Once the desired value is
achieved, press ENTER to lock that value.
www.mcmelectronics.com
9
For your safety
u
To maintain Manufacturers one year warranty and for your own
safety, read and follow all instructions.
u
There are no user replacement parts inside the product. Do not open
the product for any reason. This will invalidate your Manufacturer
Warranty and may impair the safety features of the product.
u
Do not expose this product to moisture, rain or other fluids.
u
Do not use this product near water or other fluids.
u
Do not use the product if you suspect it has been damaged in any
way, including being dropped, is malfunctioning, or has been
exposed to liquids or moisture.
u
The unit must be repaired by an authorized service center only.
Manufacturer Warranty is void if unit is opened or modified in any
way.
u
Operator safety may be compromised if this product is not operated
and maintained in accordance with the details contained in this
manual.
u
This appliance must be grounded, do not remove the ground
connection on the plug or any location supplying power to this
device.
u
Be aware that products are AC powered and are capable of producing
high voltages from its components and has high voltage inside the
cabinet.
Product installation, Use and Maintenance
u
Keep this manual for future reference.
u
Clean the product with a clean and dry, non-abrasive cloth. Do not
use solvents or liquids to clean the product.
u
To prevent overheating, do not obstruct any ventilation openings, fan
cover or vent.
