Stel TIG mP 273H DC, Инструкция по эксплуатации

Страница: 12 / 20

6998400030
12
FRONT PANEL DESCRIPTION
1 Tig spot LED mode
2 MMA LED mode
3 Tig 2T LED mode
4 Tig 4T LED mode
5 Select mode button
6 Dual-Tig™ LED mode
7 TIG HF LED mode
8 TIG HF mode button
9 Pulse Mode LED
10 Pulse Mode button
11 Encoder regulation Current/Functions
12 Tig Function button
13 Select Job button
14 Post Gas LED
15 Base Current LED
16 Slope Down LED
17 Slope Up LED
18 Welding Current LED
19 Base Current LED
20 Pre Gas LED
21 Amps Display
22 Volt Display
23 Over temperature LED
24 Welding enabled LED
25 Machine live LED
SUB MENU
- PULSE DUTY AND PULSE
FREQUENCY ADJUSTMENTS
1) Select the Pulse mode with button 10, the LED
9 illuminates .
2) With the encoder 11 adjust the value of Duty
from 10% to 90%.
3) With the encoder
11 adjust the value of
Frequency from 0,4-999Hz.
- PARAMETERS STORING
The operator can store all selected parameters in
the 60 free memory programs available. These
programs can be easily recalled at any time.
PARAMETER STORING
1) Press buttons 12 and 13 together
2) The Display will show the wording "PRG"
3) With the Encoder
11 select a program number
from 0 to 59 (the 60 is a factory default).
4) Press and hold for 5 seconds the button
5 to
store the parameters.
RECALL THE PARAMETER
1) Press buttons 12 and 13 together
2) The Display will show the wording "PRG"
3) With the Encoder
11 select the number of
program stored.
4) Press and hold for 5 seconds the button
8 (Set
Prg) to recall the parameter.
Amps
t
Frequency
Duty