STEINWAY LYNGDORF C, Руководство по установке

Страница: 23 / 34

MODEL C ROOMPERFECT™ CALIBRATION
RoomPerfect™ Introduction
Step one is where the system will define the calibration volume level. Step two is a measurement in
the main listening position, named Focus Position 1. During step three, the Room Measurement, you
will be asked to place the microphone in typically 3-6 random locations in the room while
RoomPerfect™ is mapping the acoustical properties. Finally, the system will automatically calculate
and set the corrections necessary. The typical duration of the process is 15-20 minutes.
During measurements, you can talk and move around in the room. But the measurements will last
longer depending on the level of background noise.
RoomPerfect™ Preparations
a. Place the microphone on the tripod stand. Be sure to fasten the screws properly so the microphone
does not move during a measurement.
b. Plug the supplied microphone cable into the microphone.
c. Connect the microphone cable to the XLR microphone terminal on the rear panel of the head unit.
d. Place the tip of the microphone itself in Focus Position 1 – the primary listening position. The
microphone must be aligned so that the nozzle is positioned where the center of the listener’s head
would be located – right between the imaginary ears as illustrated. The microphone must point
forward towards the loudspeakers. Do not block the line of sight during measurements.
23