STEINWAY LYNGDORF C, Руководство по установке

Страница: 14 / 34

Connecting the Head Unit
The rear panel of the head unit has an array of digital connections on top and analog connections
placed below. The digital source input section offers three phono/RCA, one XLR and one optical
Toslink. The four RJ-45 link cable terminals to the right are for connecting up to eight pairs of active
speakers via the proprietary Steinway Lyngdorf Link System.
The analog section (as seen from the left) has an XLR microphone input for RoomPerfect™
calibration, three pairs of phono/RCA stereo inputs, and one stereo pair of balanced XLR terminals.
So in total five digital and four analog sources can be connected to the head unit. Each input to be
used must be activated by naming it in the Installation Menu.
Connecting the Power Cables
DO NOT power up Model C before you have read the power-up sequence instruction on the next
page!
When all signal connections have been properly made, you can connect the Model C to the mains
power. Both the head unit and the active speakers must be mains connected with the supplied high
quality cables.
The Model C head unit will switch automatically to your local voltage, whereas the speaker amplifier
modules have been factory set to either 115 or 230 V. This setting can only be changed by a certified
service technician.
14