steinert KM 1400 SE, Руководство по эксплуатации

Страница: 5 / 11

OPERATING INSTRUCTIONS KM 1400 SE 04-2019
Modified series 09-2009 and revised 08-2013
STANDARD FITTINGS
1 4-prong-mandrel MT 2 (for spindle/headstock)
1 live centre MT 2 tip 60° (for tailstock)
1 locking pin (indexing pin) with threaded spindle (for indexing)
1 center knock-out rod (to knock out the prong-mandrel)
1 tool rest bottom part
1 tool rest upper part 350 mm
TECHNICAL SPECIFICATIONS
Centre height 180 mm
Distance between centres 760 mm (standard)
Bed extension 450 mm (optional)
Swing over bed 360 mm
Swing with outrigger appr. 600 mm (option)
Spindle thread M 33 with centering collar, inner cone MT 2
Spindle speed 2steps: 60-1.300 150-3.025 rpm/min.
Max. permissible workpiece D 400 mm 130 mm
Tailstock MT 2 quill taper, stroke 70 mm
Spindle motor 230 V/3 ph/1 hp/50 Hz,
inverter electric mains 230 V/1 ph/50 Hz
Vee-belt poly-vee-belt J210 6 ribs
Electrical system with undervoltage and overload protection
.
Dimensions L/W/H min. 1.350 x 520 x 580 mm benchtype
Weight appr. 96 kg benchtype
Paint grey-white RAL 9002/anthrazit RAL 7016
Warranty 1 year
Subject to change without alterations
The machine goes conform with CE-regulations
LIABILITY
It is not permitted to make alterations or additions to the construction of the machinery supplied, to parts of the machinery
supplied or to accessories. Any warranty and liability claims become void in such case.
SETTING UP THE MACHINE
The anti-rust protection must be removed from the bright machine parts and from the inner cone
of spindle and tailstock before first use
BENCHMODEL
use a strong and stable workbench with a minimum length of 115 cm that the footplates on left-reighthandside can
be fastened securely to the workbench
Important advice:
The inverter is fixed under the lathe bed. To ensure ventilation and to avoid overheating it is necessary
To keep this aerea clean from dust and chips ! Constantly remove chips and dust by sweeping or exhausting
Do NOT USE compressed air!