Steiner 442105 Скачать руководство пользователя

Страница: 3 / 58

ZTM 1250

12-2005

IMPORTANT MESSAGE

Thank you for purchasing this Steiner product. You have purchased a world class mowing product, one of the

best designed and built anywhere.

This machine comes with an Operation and Safety Manual and a separate Setup, Parts and Maintenance Manual.

The useful life and good service you receive from this machine depends to a large extent on how well you read and

understand these manuals. Treat your machine properly, lubricate and adjust it as instructed, and it will give you

many years of reliable service.

Your safe use of this Steiner product is one of our prime design objectives. Many safety features are built in, but

we also rely on your good sense and care to achieve accident-free operation. For best protection, study the manuals

thoroughly. Learn the proper operation of all controls. Observe all safety precautions. Follow all instructions and

warnings completely. Do not remove or defeat any safety features. Make sure those who operate this machine

are as well informed and careful in its use as you are.

See a Steiner dealer for any service or parts needed. Steiner service ensures that you continue to receive the

best results possible from Steiner’s products. You can trust Steiner replacement parts because they are

manufactured with the same high precision and quality as the original parts.

Steiner designs and builds its equipment to serve many years in a safe and productive manner. For longest life,

use this machine only as directed in the manuals, keep it in good repair and follow safety warnings and instructions.

You'll always be glad you did.

Jacobsen, a Textron Company

One Bob Cat Lane

Johnson Creek, WI 53038-0469

TABLE OF CONTENTS

FIGURES

PAGE

SAFETY ......................................................................................................................................................... 2

ASSEMBLY AND SETUP ............................................................................................................................ 3-5

MAINTENANCE CHART ................................................................................................................................ 6

MAINTENANCE RECORD ............................................................................................................................ 7

MAINTENANCE ........................................................................................................................................ 8-13

ADJUSTMENTS...................................................................................................................................... 14-16

BELT REPLACEMENT............................................................................................................................ 17-20

SPECIFICATIONS .................................................................................................................................. 21-23

ENGINE & FRAME ASSEMBLY ......................... FIGURE 1 ................................................................. 24, 25

WHEELS & BRAKES ......................................... FIGURE 2 ................................................................. 26, 27

FRONT PANEL & PUSH ARMS ......................... FIGURE 3 ................................................................. 28, 29

PUMPS & CONTROL PANEL ............................ FIGURE 4 ................................................................. 30, 31

BLOWER & FUEL TANK .................................... FIGURE 5 ................................................................. 32, 33

BELTS ................................................................ FIGURE 6 ................................................................. 34, 35

BUMPER & GRASSBOX FRAME ...................... FIGURE 7 ................................................................. 36, 37

HEAVY DUTY AIR CLEANER ............................ FIGURE 8 ................................................................. 38, 39

GRASSBOX ....................................................... FIGURE 9 ................................................................. 40, 41

ELECTRICAL ..................................................... FIGURE 10 ............................................................... 42, 43

HYDRAULICS .................................................... FIGURE 11 ................................................................ 44, 45

SEAT ASSEMBLY ............................................. FIGURE 12 ............................................................... 46, 47

DECALS ............................................................. FIGURE 13 ............................................................... 48, 49

OPTIONAL FILL INDICATOR : 970145.............. FIGURE 14 ............................................................... 50, 51

HYDROGEAR PUMP ......................................... FIGURE 15 ............................................................... 52, 53

BRAKE ASSEMBLY ........................................... FIGURE 16 ............................................................... 54, 55

Содержание 442105



























































Результаты поиска

Содержание 442105

Отзывы:

Похожие инструкции для 442105

Бренды по названию

Популярные бренды

Steiner 442105, Инструкция по установке, частям и обслуживанию

Результаты поиска

Содержание 442105

Отзывы:

Похожие инструкции для 442105

Бренды по названию

Популярные бренды