- 28 -
- 29 -
Functional Warranty
Declaration of Conformity
This product complies with
- Low Voltage Directive 2006/95/EC
- EMC Directive 2004/108/EC
- RoHS Directive 2011/65/EC
- WEEE Directive 2012/19/EC
This Steinel product has been
manufactured with utmost care,
tested for proper operation and
safety and then subjected to ran-
dom sample inspection. Steinel
guarantees that it is in perfect
condition and proper working
order.
The warranty period is 36 months
and starts on the date of sale to
the consumer. We will remedy
defects caused by material flaws
or manufacturing faults. The war-
ranty will be met by repair or re-
placement of the defective parts
at our own discretion. The war-
ranty shall not cover damage to
wear parts, damage or defects
caused by improper treatment or
maintenance. Further conse-
quential damage to other ob-
jects is excluded.
Claims under the warranty will
only be accepted if the product is
sent fully assembled and well
packed complete with a brief de-
scription of the fault as well as a
receipt or invoice (date of pur-
chase and dealer's stamp) to the
appropriate Service Centre.
Repair service:
Please ask your nearest service
centre how to proceed for repair-
ing faults not covered by the
warranty or occurring after the
warranty expires.
Troubleshooting
Light does not switch 'ON'
Light does not switch 'OFF'
Sensor switches 'OFF' in spite of
persons being present
Sensor does not switch 'OFF'
quickly enough
Sensor does not switch 'ON'
quickly enough when approached
from the front
Sensor does not switch 'ON' when
persons are present in spite of it
being dark
No supply voltage
Lux setting too low
No motion detection
Lux setting too high
Stay-'ON' time running out
Interference from sources of
heat, e.g.: fan heater, open
doors and windows, pets,
light bulb/halogen floodlight,
moving objects
Stay-'ON' time too short
Light-level threshold too low
Stay-'ON' time too long
Reach is reduced when
approached from the front
Lux setting too low
Check supply voltage
Slowly increase lux setting
until light switches 'ON'
Ensure unobstructed sensor
vision
Check detection zone
Reduce lux setting
Wait until stay-'ON' time
elapses; reduce stay-'ON'
time if necessary
Use stickers to mask out
stationary sources of
interference
Increase stay-'ON' time
Change light threshold
Reduce stay-'ON' time
Install additional sensors
Reduce distance between
two sensors
Sensor deactivated by
switch/button?
Semi-automatic mode?
Increase light-level threshold
Malfunction
Cause
Remedy
GB
PC PRO HF360_DualHF_Osteuropa.indd 28-29
PC PRO HF360_DualHF_Osteuropa.indd 28-29
11.09.13 10:36
11.09.13 10:36
