Speedclean Eco 30
2011_V1
page 12 of 16
6 Filter
Operations
The filtration system is equipped with a 3-way central valve on the container cover for manual control of the de-
vice, which is designed for the required flow rate. Press down firmly on the valve lever with the heels of your
hands then rotate to the desired setting. Before moving on to the Startup Section, please make yourself familiar
with your new filtering system’s valve settings and functions.
Setting
Complete Water Flow/Function
Valve Diagram
Filtration
Position 1
Function: Vacuum, regular pool filter action. This
is the setting the filter will be set to most of the
time. In this position, water is directed through the
top of the filter where it compresses and flattens
down the sand. Contaminants are trapped by the
sand as water makes it way to the bottom strain-
er, out of the filter and back to the pool.
Backwash
Position 2
Function: Clean filter of captured debris. This is
the position needed to clean the filter and sand.
You’ll know it is time to backwash when the pres-
sure gauge rises 0,3 to 0,6 bar above what it
normally reads when the filter is clean. In this po-
sition, water is directed through the bottom
strainer, reversing the flow through the tank. This
causes the sand to separate and lift while releas-
ing trapped debris out the waste line.
Closed
Position 3
Function: This position stops the flow of water in-
to the pump and filter.
CAUTION: Do not run pump with valve in this
position.
Содержание Speedclean Eco 30
Страница 17: ......