Steinbach Nuovo Deluxe Скачать руководство пользователя

Страница: 6 / 38

Nuovo deluxe rund

| 2015_V1

Page 6 of 38

These installation instructions are valid in general, if you place your
pool free.

If you sink your pool partially or completely, so please

check the separate instructions in the installation manual and the in-
stallation instructions enclosed.

To protect you from unnecessary surprises, it makes sense that you
make a plan before setting up the pool on what material you need
and what you want to do in a time schedule

Do not install the swimming pool on a windy day. It is extremely diffi-
cult to keep the swimming pool wall upright and it would probably
fall, resulting in injuries

Mount the pool liner on a warm, sunny day,

so it is easy to interpret in the pool. You shouldn’t also mount the
swimming pool liner in direct sunlight, since the thermal expansion
not an optimal fit of the film is given

The best time for the installation

of the swimming pool liner is in summer, early morning or late even-
ing

Do not mount the pool liner at temperatures below 15°C, other-

wise the film is stiff and difficult to assemble.

The swimming pool filter system and other accessories may be op-
erated electrically. If you do not have appropriate electrical connec-
tions in your garden, it is necessary to establish this.

The necessary electrical connections must be made by a licensed
electrical contractor.

The supply lines are secure and in addition to

earth with a residual current circuit breaker 30 milliamps

The rele-

vant statutory provisions as ÖVE, VDE etc. must be observed.
Avoid sharp objects in the pool. This could lead to damage to the
film. Do not climb onto the handrail. This could result in damage to
the handrail or the pelvic wall

Swimming pools with a depth of 90 or 120 cm are not suitable for
dives or headjumps. Failure to comply could result in severe head or
spinal injuries!
Never leave your children unattended when they are in or around the
swimming pool!
Should there be children in your home or neighborhood, who can not
swim, we recommend you to set up an inexpensive mesh fence
which is available in construction stores, around your pool. Tarpau-
lins or other pool covers do not provide child safety. So do not leave
that pool covers, no matter what kind they are, get rid of the respon-
sibility for your children.

Location of your pool (Figure 1)

When

choosing a location

for your pool

you should

take

considera-

tion

of several factors

Under no circumstances, the swimming pool must be installed below
ground level. This swimming pool must only be installed above
ground and on a hard, solid ground.

Your pool

should

therefore

not

be bolted

banked

surfaces

This could lead to

subsidence and

thus

damage to the

swimming pool

. If it is possible c

hoose

the

sun-

niest spot

in your garden

The larger the area

the basin

, the better

it is.

At least you should

have an open space of

about 90 cm

around

the

pool.

If there is

the possibility of

a sheltered spot

, so

you should

choose

for your pool

A swimming pool

which is

unprotected from

the

wind is

subject to a high

heat loss by convection

and

evaporation

You

should

n’

t place

your pool

next to or

under

trees

, bushes, etc.

(large

maintenance effort)

Under no circumstances your pool should be installed under over-
head lines. Avoid providing your pool on land lines.

Location of the filter system

Your pool should be equipped with a sand filter. In free-standing filter
systems is a minimum distance from the edge of the pool to be ob-
served. For further information please see the attached description
of the filter system

Preparing an installation site

We want you to have your pool for many years with great pleasure.

The effort and care that you put into the preparation of the founda-

tions can make a great difference in the life span of your swimming
pool and its liner

The better prepared and fixed the place is, the

longer you will have to enjoy your swimming pool. Therfore we apply
appropriate care. It is absolutely necessary that the ground on which
your pool is built is flat and stable (no banked areas).

Settlements

would inevitably

lead to deformity

and

damage to

your

pool

Remove roots, grass and stones in the selected area, including

those under the ground. The weight of the water will compress these
elements between the liner and the earth under the swimming pool,
resulting in damages. Grass left underneath the pool liner will rot and
give of an unpleasant odor and stones and roots will damage the
pool liner.

If you build your pool directly on concrete, asphalt or a similar sur-
face, so it is essential that between the substrate and the film a
commercial mineral fiber fabric is introduced as a separating layer.
Never install this swimming pool inside a garage, or on a balcony,
roof, terrace or any other surface that is not completely flat and solid.
The maximum weight that the installation site can support must be
taken into consideration.
The basin is generally not suitable for installation in the ground,
there is no guarantee at contravene.

Plot the place of installation

Please refer to the dimensions according to the table and draw on
your installation location with lime powder or spray paint.

3. Hammer a peg into the ground in the center of the area where

you want your pool.

4. N

ow drag a circle with a cord and a can of paint or spray with lime

powder, with the radius of which is specified in the table.

Tank size

R+ detached

R+ sunk

Ø 3,5 m

1,75 m

2,0 m

2,25 m

Ø 4,0 m

2,0 m

2,25 m

2,5 m

Ø 4,6 m

2,30 m

2,55 m

2,80 m

Ø 5,5 m

2,75 m

3,0 m

3,25 m

R+

is the radius of the required footprint. (Figure 2,4)

3. Level the ground in the marked area. The entire area of the

swimming pool must be leveled and free of stones and twigs. (Fig-
ure 5)

Leveling the place of installation

Using a leveling tool, a straight wooden board or even better would
be a yardstick (alu slat) and level the surface down to the level of the
lowest point. Do not fill in the holes; dig away higher areas. Scatter a
fine layer of sifted sand over the levelled surface and level again. Dig

from

the raised spots

In no case

the

subscript

throw up

this could

lead to

subsidence.

Figure 6, 7

Now pave the installation location so until this is completely flat. Only
a properly prepared installation site is a prerequisite for a functional
pool.

Using floor insulation:
If you isolate the pelvic floor with Styrofoam or Styrodur, it is neces-
sary to make the whole pool to the insulation.

Bring

maximum of

3 cm

thick, flat

gravel

layer

and

compress

them

Then place the

insulation