Steinbach 061206, Оригинальное руководство пользователя

Страница: 29 / 44

Safety
The following signal words are used in these operating instructions.
WARNING!
This signal symbol/word denotes a hazard with an
average risk level that could lead to death or severe
injury if it is not avoided.
CAUTION!
This signal symbol/word denotes a hazard with a low
risk level that could lead to mild or moderate injury if
it is not avoided.
NOTICE!
This signal word provides a warning about potential
material damage.
General safety instructions
WARNING!
Risk of electric shock!
Faulty electric installation or excess mains voltage can cause an
electric shock.
- Only connect the power cable if the mains voltage of the socket
matches that on the type plate.
- Only connect the power cable to an easily accessible socket so
that you can quickly disconnect it in the case of a fault.
- Only connect the power cable to a grounded socket.
- Only operate the device on a grounded socket secured with at
least 16A.
- The device must be powered via a residual current device with a
rated residual current of at most 30 mA.
- Do not operate the device if it shows visible damage or if the
power cable is defective.
- Do not open the device; leave repairs to an expert. Contact the
service address on the back of the instruction manual for this
purpose. All liability and warranty claims will be void in the case
of arbitrary repairs, improper connection or wrong operation.
- Never touch the power cable with wet hands.
29
en