4
INSTALLATION OF EMBRACE FRAMELESS SHOWER
Please ensure you have read and understood the ‘Installation Notes’ on Page 1.
MARKING OUT
Identify your specific shower using the Layout Plan on page 3. Using the appropriate
measurements mark out the channel positions on the tile base.
Position the floor channels in place to ensure door space is correct
(TIP: This can easily be completed by placing the aluminum water bar (11) in position.
Please note that you should not have to cut your water bar).
Ensure tiles are clean and free of dust and dirt. Once the channels are correctly in place,
remove the double sided tape backing and attach floor channels to the tiles.
INSTALLING WALL CHANNELS
The wall channels are recessed at one end. This is designed to fit over the floor channels.
Position the wall channels over the floor channels. Plumb and mark the position with a
pencil on the tiles (refer Diagram C).
1
2
3
4
DIAGRAM A:
DIAGRAM B:
FIXED RETURN
PANEL (A)
WALL
W
ALL
HINGE
PANEL (C)
WATER BAR (D) -
HELPS IDENTIFY CORRECT SPACING
(DOOR + GAPS = WATER BAR LENGTH)
WALL CHANNEL
WALL CHANNEL
RECESSED END
WALL CHANNEL
FLOOR CHANNEL
FITS INTO WALL
CHANNEL RECESS
FLOOR CHANNEL
5
